ISO 9001 certified production, CE marking to EN 14041, SGS testing to EN 15534-1 — and the actual measured numbers from our test reports, published for you to check before you order.
Our quality system, factory production control and product performance are verified by independent bodies — not self-declared. Copies of all certificates are available on request.
A certified quality management system covering the production and service of wood-plastic composites and WPC window frames.
Declaration of conformity under the EU Construction Products Regulation for wood plastic composite flooring.
Independent laboratory testing of dimensions, bending strength, slip resistance and formaldehyde emission on production samples.
These are the actual results recorded in our third-party test reports, shown against the specification they were measured against. No cherry-picking: every line is from the report.
| Test item | Standard | Requirement | Measured result | Status |
|---|---|---|---|---|
| Bending failure load | GB/T 24508-2009 | ≥ 2,500 N | 3,636 N | Pass |
| Freeze-thaw bending retention | GB/T 24508-2009 | ≥ 80 % | 81 % | Pass |
| Density | GB/T 24508-2009 | ≥ 0.85 g/cm³ | 0.95 g/cm³ | Pass |
| Water absorption | GB/T 24508-2009 | ≤ 3.0 % | 1.2 % | Pass |
| Size change after water absorption (length) | GB/T 24508-2009 | ≤ 0.3 % | 0.1 % | Pass |
| Surface wear resistance | GB/T 24508-2009 | ≤ 0.15 g/100r | 0.08 g/100r | Pass |
| Colour fastness (grey card) | GB/T 24508-2009 | ≥ grade 4 | Grade 4 | Pass |
| Burning performance — critical heat flux | GB/T 24508-2009 | ≥ 8.0 kW/m² | 8.3 kW/m² | Pass |
| Slip resistance | EN 13893:2002 | — | Class DS, μ = 0.26 | Tested |
| Formaldehyde emission | EN 717-1:2004 | — | Not detected (ND) | Tested |
Results shown are for the tested model 166×20 mm in the indicated reports. Test data for specific models, colours and thicknesses is available on request.
Every document below is a real certificate held by our factory. Click any thumbnail to view it at full size — we are happy to send originals to distributors and project buyers.
Extrusion lines, raw-material handling and laboratory testing — the equipment that turns recycled polymer and wood flour into a board that holds its shape for decades.
Quality is controlled at each stage, not inspected at the end. A batch that fails any checkpoint is held, not shipped.
Wood flour moisture, polymer grade and additive batches checked against specification before acceptance.
Formulation weighed to recipe, then compounded and pelletised with controlled temperature and mixing time.
Line speed, die temperature and cooling profile monitored continuously; dimensions checked during the run.
Samples tested for bending load, density, water absorption and colour before the batch is released.
Boards packed with batch codes so any claim can be traced back to its production run and test record.
For warranty terms, see the warranty information page. For installation and care, see our technical guides.
Tell us the product model and destination market — we will send the matching test reports, certificates and declarations for your tender, customs or distributor file.
English
